T3 Sports Combat II Hockey Gloves

About the T3 Sports Combat II Hockey Gloves

Developed at T3 Sports' Bengaluru R&D facility, the Combat II Hockey Gloves represent a targeted step up from the Combat I — replacing alternating finger-segment design with uniform full-blue foam coverage across all four fingers for consistent impact absorption at every contact zone. The expanded cuff panel extends forearm coverage further than its predecessor, absorbing wrist-level blows from high sticks on both inline and ice surfaces, including the ASICS rink in Bengaluru. A full-length split-leather palm runs fingertip to lower hand, with individually black-stitched finger gussets resisting seam separation under grip load — critical during extended play in India's humid rink environments where palm integrity degrades faster. A black neoprene wrist cinch band seals the cuff against the forearm, preventing puck debris and moisture ingress. The reinforced thumb gusset with embroidered badge addresses the highest-wear zone in stick handling. At every contact surface, the Combat II prioritises coverage consistency over weight savings, making it the specification-grade choice for competitive league play.

Overview

Uniform Finger Protection

The all-blue segmented finger system replaces Combat I's alternating design with denser, consistent foam across all four fingers — delivering uniform impact absorption whether a slash lands on the index or the pinky.

• Full-blue foam roll covers all four finger zones equally
• Denser foam layer handles higher-force slashes than Combat I
• Independent segment articulation preserves natural finger flex
• COMBAT II labelled guard identifies advanced protection tier

Split-Leather Palm Control

A full-length split-leather palm paired with individually stitched finger gussets gives stick feel and structural durability across inline and ice surfaces — with wider leather coverage than Combat I for extended service life.

• Split-leather spans fingertip to lower palm for full contact coverage
• Individual black-stitched gussets resist seam separation under load
• Wider palm coverage area extends glove durability versus Combat I
• Neoprene wrist band seals cuff against debris and moisture ingress

T3 Sports Combat II Hockey Gloves specifications

Key features

• Full-Blue Segmentation — Uniform blue foam segments replace the alternating black-blue pattern of Combat I, creating a denser and more consistent protective layer that responds to impact with equal force distribution across every finger zone.
• Expanded Cuff Panel — The significantly wider and taller cuff panel extends forearm coverage beyond the Combat I's narrower profile, absorbing high-stick and cross-check impacts at wrist level on both inline and ice surfaces.
• Split-Leather Palm — Full-length split-leather from fingertip to lower palm maintains stick-feel fidelity and structural grip. The material performs consistently across ambient temperatures, an important consideration in India's varied rink and inline environments.
• Gusset Construction — Individual finger gussets stitched with black thread at each seam junction prevent separation under repeated grip pressure — a critical durability feature for players logging high session volumes in competitive league formats.
• Neoprene Wrist Seal — A black neoprene wrist cinch band sits beneath the cuff panel, conforming to the forearm to create a closed seal that prevents puck debris, moisture, and pad displacement during active play.
• Thumb Reinforcement — The thumb base junction — the highest-wear zone during stick handling — is strengthened with reinforced double-stitch gusset construction and marked by an embroidered T3 Sports badge, combining durability signalling with structural integrity.
• Mesh Interior Lining — A full blue mesh interior with segmented foam padding at the wrist ensures airflow retention and moisture management, reducing heat build-up during extended play in enclosed rink environments like ASICS Bengaluru.

T3 Sports Combat II Hockey Gloves size guide

Hockey glove sizing is measured in inches corresponding to the distance from the base of the palm to the tip of the middle finger multiplied across standard glove lengths. Measure your dominant hand and match against hand circumference in centimetres for the most accurate Combat II fit.

Fitting tip: For inline hockey in warmer Indian conditions, size up by one increment if you plan to layer a liner glove underneath — the neoprene wrist band accommodates additional layering without compromising cinch security. Never size down; restricted flex reduces protection efficiency.

How it compares

T3 Sports Combat II Hockey Gloves vs Bauer GSX Hockey Gloves

T3 Sports Combat II Hockey Gloves vs CCM Tacks 70 Hockey Gloves

T3 Sports Combat II Hockey Gloves — frequently asked questions

How does the Combat II differ from the Combat I in protection level?

The Combat II upgrades to uniform full-blue foam across all four fingers, replacing Combat I's alternating black-and-blue segmentation. The cuff panel is wider and taller by at least 15 mm, extending forearm coverage. Palm leather coverage area is also larger, improving structural durability under repeated use.

Are the Combat II gloves suitable for both inline and ice hockey?

Yes. The split-leather palm, segmented foam, and neoprene wrist seal are engineered for both inline and ice surfaces. The palm material performs across the temperature range encountered at Indian rinks, including the enclosed ice environment at ASICS Bengaluru and outdoor inline courts.

What certification standard do the Combat II gloves meet?

Please contact T3 Sports directly for current certification documentation applicable to your league or governing body. Certification requirements vary between Hockey India affiliated leagues, inline formats, and international play, and T3 Sports can provide relevant compliance data upon inquiry.

How should I care for the split-leather palm to extend its lifespan?

Wipe the palm with a dry cloth immediately after each session to remove moisture and residue. Apply a light leather conditioner every 30–45 days of active use. Never machine-wash or submerge gloves — moisture saturation weakens stitching at the finger gussets and degrades neoprene elasticity in the wrist seal.

Does the neoprene wrist band restrict wrist mobility?

The black neoprene cinch band is designed for a secure seal, not immobilisation. Neoprene at standard wrist-band gauge allows full flexion and extension required for stick handling and shot mechanics. Players with larger wrist circumferences above 20 cm should verify fit before extended use.

Can the finger segments on the Combat II be repaired if damaged?

Individual finger segment covers are stitched independently, which means targeted repairs are possible without replacing the full glove. T3 Sports recommends returning gloves to an authorised service point for segment repair to preserve foam compression integrity and stitching alignment.

What mobility rating do the Combat II gloves carry?

The independent segment articulation on all four fingers is engineered to preserve natural flex under load — players can close and open the hand through the full grip cycle without resistance from the foam layer. Precise mobility rating data is available from T3 Sports upon B2B inquiry.

Are the Combat II gloves ventilated for warm-climate play?

The full blue mesh interior lining promotes airflow between the hand and the foam padding, reducing heat accumulation during high-intensity play. For Indian rink environments where ambient humidity can exceed 70%, this mesh construction helps maintain comfort across sessions lasting 45 minutes or more.