T3 Sports Combat 1 Hockey Gloves

About the T3 Sports Combat 1 Hockey Gloves

The T3 Sports Combat 1 Hockey Gloves are purpose-built protective equipment for competitive inline and ice hockey players who refuse to trade stick feel for hand safety. The glove's four-finger back features alternating dual-colour foam roll segments — each operating independently — so natural finger articulation is preserved through slashes and blocked shots without compromising per-segment impact absorption. A two-tone split-leather palm, constructed with off-white finger-base zones and a grey lower-palm durability panel, is stitched with reinforced inter-finger gussets that resist tearing under repeated high-grip-pressure sessions. The wide foam-padded cuff, lined entirely in a light blue moisture-wicking mesh interior, accommodates wrist guards used across both ice and inline formats, including play at ASICS rink in Bengaluru and outdoor roller hockey courts across India. Contoured segmented foam across the metacarpal zone on the back panel, edged with white accent piping, absorbs backhand impact during defensive blocks while maintaining full wrist rotation. The Combat 1 tier designation communicates a defined protection level within T3's protective hierarchy, aiding equipment managers and team procurement officers in structured gear selection.

Overview

Segmented Finger Defense

Alternating black and light blue foam roll segments across all four fingers provide independent per-segment impact absorption. Each segment moves autonomously, preserving natural finger articulation during slashes, puck blocks, and stick deflections across full competitive sessions.

• Independent segment movement protects through full hand flex
• Dual-colour foam rolls clearly identify the Combat 1 protection tier
• Segment-by-segment absorption handles repeated slash impacts
• Design suits both inline and ice hockey defensive situations

Split-Leather Palm Grip

A two-tone split-leather palm pairs tactile stick feel with structural durability. Reinforced black-thread inter-finger gussets resist tearing under sustained grip load, while the grey lower-palm panel concentrates material thickness precisely where wear rates are highest during game play.

• Two-tone construction separates feel zone from wear zone
• Reinforced gussets prevent tearing under repeated grip pressure
• Grey lower palm panel maximises durability in the highest-wear area
• Stitching pattern maintains glove shape through extended use

T3 Sports Combat 1 Hockey Gloves specifications

Key features

• Dual-Colour Foam — Alternating black and light blue foam roll segments on the finger back provide visual identification of protection tier while each independent segment absorbs impact without restricting the adjacent finger's natural range of motion.
• Split-Leather Palm — Off-white split leather across finger-base zones maximises tactile feedback for stick handling, while the grey lower-palm panel concentrates additional material thickness at the highest-wear contact point across sessions of 60 minutes or more.
• Reinforced Gussets — Black thread inter-finger gussets are stitched at elevated seam density between all four fingers, preventing tearing under the repeated lateral grip forces generated during puck control, face-offs, and defensive stick checks.
• Mesh Interior Lining — Light blue mesh fabric lines the full cuff interior, actively wicking sweat away from the wrist during high-intensity play — a feature of particular value in the 28–35 °C ambient temperatures common to Indian inline hockey venues and covered rinks.
• Metacarpal Foam — Contoured segmented black foam across the back-of-hand metacarpal zone, edged with white accent piping along the side seams, absorbs backhand impact during defensive shot blocks while preserving the low-profile geometry needed for natural wrist rotation.
• Wide Cuff Entry — The foam-padded wide-cuff opening is engineered to layer over standard ice and inline hockey wrist guards, enabling players at venues including the ASICS rink in Bengaluru to maintain their existing protective layering without fit compromise.
• Tier Identification — The 'COMBAT 1' labelled finger guard communicates a defined position within T3 Sports' protective hierarchy, enabling equipment managers, coaches, and team procurement officers to standardise glove selection across roster sizes efficiently.

T3 Sports Combat 1 Hockey Gloves size guide

Hockey glove sizing is based on the distance from the base of the palm to the tip of the middle finger, measured in inches. Use a soft tape measure and round up to the nearest whole size if you fall between measurements. The Combat 1's wide cuff entry accommodates most standard wrist guard profiles.

Fitting tip: If you wear wrist guards underneath — common in Indian inline hockey — size up by one increment to preserve the full foam-padded cuff clearance. Gloves should feel snug but allow a closed fist with no restriction across the split-leather palm zone.

How it compares

T3 Sports Combat 1 Hockey Gloves vs Bauer GSX Hockey Gloves

T3 Sports Combat 1 Hockey Gloves vs CCM Tacks AS 550 Hockey Gloves

T3 Sports Combat 1 Hockey Gloves — frequently asked questions

What certifications do the T3 Sports Combat 1 Hockey Gloves meet?

The Combat 1 gloves are designed to meet the protective requirements of competitive inline and ice hockey play. Specific certification details including HECC or BIS compliance should be confirmed with T3 Sports directly for your league's equipment regulations, as certification tiers may vary by regional governing body.

Are these gloves suitable for both inline and ice hockey?

Yes. The Combat 1 is specifically engineered for dual-format use. The split-leather palm performs across dry inline surfaces and cold ice environments, and the wide cuff entry accommodates the wrist guard combinations used across both formats, including inline roller leagues and ice sessions at facilities such as the ASICS rink in Bengaluru.

How do the segmented foam rolls protect fingers differently from a moulded shell?

Segmented foam rolls allow each section to compress and rebound independently, meaning an impact on one finger segment does not transmit stiffness to adjacent segments. A rigid moulded shell distributes force broadly but restricts articulation. The Combat 1's segment-by-segment design preserves natural finger flex while still absorbing slash and blocked-shot impact across all four fingers.

How should I care for the split-leather palm to maximise its lifespan?

Wipe the split-leather palm with a dry cloth after each session to remove moisture and rink debris. Apply a light leather conditioner every 30–40 hours of play to prevent the material from drying or cracking, particularly in low-humidity air-conditioned environments. Avoid soaking or machine washing; the reinforced gusset stitching is not designed for submersion.

Can the Combat 1 gloves fit over standard wrist guards?

Yes. The wide foam-padded cuff opening is deliberately sized to layer comfortably over standard inline and ice hockey wrist guards. If you use a bulkier wrist protection system, size up by one glove size to ensure the cuff perimeter foam does not compress the wrist guard's own protective foam elements.

What is the mobility rating of these gloves for competitive play?

The Combat 1 is designed for high-mobility competitive use. Independent finger segments, a contoured low-profile metacarpal foam panel, and reinforced inter-finger gussets collectively enable a full grip closure, natural wrist rotation, and stick-handling dexterity across full 60-minute sessions without progressive stiffening.

What does the 'Combat 1' tier designation mean within T3 Sports' product range?

The Combat 1 designation identifies this glove's position within T3 Sports' protective hierarchy, signalling a defined level of protection features and construction quality. The tier labelling is printed on the finger guard and is intended to help coaches, equipment managers, and team procurement officers standardise protective gear selection across squads efficiently.

How do I determine the correct glove size in Indian sizing versus standard North American sizing?

Hockey glove sizes are universal and measured in inches from palm base to middle-finger tip regardless of region. A 14-inch glove measures 31–32 cm in hand length. Use a soft tape measure on your dominant hand. T3 Sports' size guide provides both centimetre and inch measurements to assist players across India and other Asian markets.