Sherwood T60X Junior Shin Guards

About the Sherwood T60X Junior Shin Guards

The Sherwood T60X Junior Shin Guards are built around a pre-curved, anatomical shell that mirrors the natural geometry of a junior athlete's lower leg, reducing rotational shift during aggressive skating strides. The hard outer cap distributes impact force across a broad surface area, protecting the tibia, fibula, and knee from puck strikes and board contact common in junior league play across Indian rinks. The removable sublimated liner introduces a dual benefit: the printed pattern resists dye bleed under humid conditions typical of enclosed Indian rinks, while the detachable design allows independent washing after high-intensity sessions. Strapping uses dual adjustable hook-and-loop closures that maintain position without restricting ankle dorsiflexion. At a junior-appropriate weight, the T60X does not penalise younger skaters' stride efficiency. Developed with junior body proportions as the primary constraint, the T60X suits players participating in school leagues, Hockey India age-group programmes, and recreational sessions at facilities like the ASICS rink in Bengaluru.

Overview

Anatomical Shell Fit

The pre-curved hard cap follows junior leg geometry precisely, preventing the rotational drift that flat-profile guards suffer during crossovers and edge transitions on ice surfaces in Indian rinks.

• Pre-curved profile matches junior tibia geometry
• Hard ABS cap distributes puck-impact force broadly
• Knee cap integration protects the patella on falls
• Dual strap closure locks position without restricting movement

Removable Liner System

The sublimated liner detaches in seconds for independent laundering, addressing hygiene demands in warm, humid Indian rink environments where sweat accumulation accelerates odour and foam degradation.

• Fully removable liner for independent machine wash
• Sublimated pattern resists fade and dye bleed
• Foam core wicks moisture away from the shin
• Re-inserts securely without tool or adhesive

Sherwood T60X Junior Shin Guards specifications

Key features

• ABS Hard Cap — The acrylonitrile butadiene styrene outer shell resists deformation on puck impact and board contact, maintaining structural integrity across an entire junior season without cracking or compression set.
• Anatomical Pre-Curve — Shell geometry is shaped to a junior lower-leg profile, reducing the internal void that causes guards to rotate during crossovers, ensuring protection remains centred on the tibia throughout dynamic play.
• Sublimated Liner — Sublimation printing bonds pigment directly into the liner fabric at the fibre level. Colour and pattern remain stable after repeated washes, maintaining visual identity across the full product lifespan.
• Removable Design — The liner separates from the shell without tools, enabling players and equipment managers to launder the contact layer independently — a critical hygiene advantage for junior players training in India's warmer climates.
• Ventilated Back Panel — An open-channel backing on the calf-facing surface promotes airflow between the guard and the leg, reducing heat accumulation during long training blocks at enclosed rinks operating above 18°C ambient temperature.
• Dual Strap Closure — Two independent hook-and-loop closure straps — positioned at mid-shin and below the knee — distribute retention force evenly, eliminating pressure points while maintaining guard alignment during explosive stride transitions.
• Junior Proportions — Size range and strap spacing are calibrated to junior athlete leg dimensions, preventing the excess bulk and improper knee-cap alignment that occurs when adult-sized guards are downsized without proportion adjustment.

Sherwood T60X Junior Shin Guards size guide

Shin guard size (in inches) is about the same as the length from the middle of your knee to the top of your ankle. Height is a good quick check.

How to measure

1. Sit on a chair with your knee bent at a right angle.
2. Measure from the centre of your kneecap down to the top of your ankle (where the skate boot starts), in inches.
3. That number is roughly your shin guard size. The guard should cover your kneecap and reach the skate tongue.

Shin guard size chart

• Between two sizes? Pick the smaller one if you like a light, mobile fit; the bigger one if you want more coverage over the skate tongue.
• Wear the guard over (or under) the skate tongue the same way every time — it changes the size you need by about 1 inch.
• Not sure? Message us on WhatsApp (+91 91112 22274) with your measurements and we will confirm the right size before you order.

Based on Sherwood's junior shin guard size chart.

How it compares

Sherwood T60X Junior Shin Guards vs Bauer Nexus Junior Shin Guards

Sherwood T60X Junior Shin Guards vs CCM Tacks Junior Shin Guards

Sherwood T60X Junior Shin Guards — frequently asked questions

What certification do the Sherwood T60X Junior Shin Guards meet?

The T60X is designed to comply with standard hockey protective equipment safety requirements governing impact resistance and coverage area for junior players. Equipment managers sourcing for Hockey India-affiliated junior programmes should verify current BIS or league-specific requirements before bulk procurement.

How do I correctly size junior shin guards by player height?

Measure from the centre of the kneecap to the top of the skate boot while the player stands upright. Match this shin-length measurement — not overall height — to the size chart. For players between sizes, select the larger option to ensure full kneecap coverage is maintained throughout growth.

How should the removable liner be washed?

Remove the liner from the shell before washing. Machine wash on a cold, gentle cycle using a mild detergent. Do not tumble dry; air dry flat at room temperature. The sublimated print is colourfast, but high heat accelerates foam degradation. Reinsert only when the liner is fully dry to prevent mildew in the closed foam structure.

How is the T60X shin guard secured to the leg during play?

Two independent hook-and-loop straps — one positioned at mid-shin and one below the knee — secure the guard. Both straps adjust independently, allowing fit calibration for players wearing different sock thicknesses. No tape is required, though some players and coaches prefer athletic tape over the lower strap as an additional precaution.

Are these shin guards suitable for humid indoor rink conditions in India?

Yes. The perforated inner foam and open-channel back panel promote airflow against the leg, reducing heat and moisture build-up at rink ambient temperatures above 18°C. The removable liner enables post-session washing that maintains hygiene through multi-session training weeks, which is standard at year-round Indian ice facilities.

Can the T60X be used for both ice hockey and inline hockey?

The T60X shin guard's protective shell and coverage geometry are appropriate for both ice and inline hockey. For inline use, the absence of a skate boot cuff means the lower edge of the guard should be secured with athletic tape to prevent upward drift during aggressive stride mechanics on a sport court surface.

What is the mobility rating of these shin guards, and why does it matter for junior players?

The T60X is rated for high mobility, meaning the shell and strap placement do not restrict ankle dorsiflexion or knee flexion within the range required for standard skating mechanics. For junior players still developing edge control and skating posture, unrestricted joint movement accelerates skill acquisition without sacrificing impact protection.

How durable is the sublimated liner pattern after extended use?

Sublimation embeds pigment at the fibre level rather than printing on the surface, making the pattern resistant to peeling, cracking, or fading under repeated wash cycles. Under normal junior-use conditions — three to five sessions per week — the pattern retains visual integrity across a full competitive season.