Sherwood T20 ABS Replacement Blade

About the Sherwood T20 ABS Replacement Blade

The Sherwood T20 ABS Blade is a purpose-built replacement blade for outdoor hockey on asphalt and concrete. Traditional wood blades degrade rapidly on hard surfaces. This blade's ABS core resists cracking, chipping, and moisture absorption across India's year-round outdoor conditions. Multi-directional fibreglass reinforcement runs heel-to-toe, maintaining blade stiffness under repeated impact loads. The result is a consistent puck or ball release shot after shot. The blade accepts standard two-piece shaft connections, making it compatible with most recreational shafts on the Indian market. Surface hardness is calibrated for rough terrain, reducing edge wear by a measurable margin versus untreated ABS constructions. Players competing on cemented courts, school yards, or club facilities outside the ASICS rink in Bengaluru will find this blade absorbs surface vibration without sacrificing shot accuracy. It is designed for durability-first recreational and club-level play across India's diverse outdoor hockey environments.

Overview

ABS Fibreglass Core

The layered ABS and fibreglass construction resists cracking on abrasive surfaces. It maintains structural integrity through India's extreme heat, monsoon humidity, and the physical demands of road and court hockey.

• Multi-directional fibreglass prevents heel-to-toe flex collapse
• ABS polymer core absorbs surface impact on concrete
• Moisture-resistant construction rated up to 45 °C
• Consistent blade geometry over extended outdoor use

Two-Piece Compatibility

Standard tapered shaft connection ensures broad compatibility with recreational and club-level shafts. Replacing a worn blade takes under two minutes, reducing downtime during training sessions at outdoor facilities.

• Fits standard 3.81 cm tapered two-piece shafts
• Tool-free blade swap in under two minutes
• Compatible with most recreational shaft brands available in India
• Secure lock-fit reduces blade rattle at high shot speeds

Sherwood T20 ABS Replacement Blade specifications

Key features

• ABS Core — Acrylonitrile butadiene styrene forms the primary core. It resists cracking under lateral impact and does not absorb moisture, making it suitable for outdoor play in humid Indian conditions.
• Fibreglass Reinforcement — Multi-directional fibreglass strands run across the full blade face. This reinforcement prevents flex collapse at the heel and maintains a predictable puck or ball release angle shot after shot.
• Heat Stability — The blade's polymer matrix is formulated to resist thermal softening up to 45 °C ambient. Outdoor courts across India regularly exceed 40 °C in summer months, where standard blades deform.
• Tapered Taper Fit — A precision-machined 3.81 cm taper interface seats firmly in standard two-piece shafts. The tight tolerance reduces blade movement under load, which protects shot accuracy and extends connection life.
• Surface Durability — The blade edge and face are calibrated for asphalt and concrete abrasion. Surface hardness exceeds that of untreated wood blades, reducing visible wear during recreational and club-level outdoor sessions.
• Standard Lie Geometry — A 5.5 lie angle positions the blade flat on hard surfaces without heel or toe lifting. This geometry suits upright skating positions common in road hockey and outdoor club play in India.
• Rapid Replacement — The two-piece design converts blade replacement into a routine maintenance step. Players can carry a spare T20 blade to outdoor sessions and swap without tools, minimising disruption to training time.

Sherwood T20 ABS Replacement Blade size guide

The Sherwood T20 ABS blade is a replacement blade. It slides into the end of a hollow (two-piece) stick shaft. Check your shaft before ordering.

How to measure

1. Look at the bottom of your shaft: a replacement blade needs a hollow shaft with an open end.
2. Check the shaft level printed on it (Senior / Intermediate / Junior).
3. Match the blade to your shaft level and your shooting hand (Left / Right).

Will it fit my stick?

• Most blades are fixed with hot-melt glue (heat the blade end with a hair dryer or heat gun).
• Blades are left- or right-handed — order the same hand as your stick.
• Not sure? Message us on WhatsApp (+91 91112 22274) with your measurements and we will confirm the right size before you order.

Standard fit for senior replacement blades.

How it compares

Sherwood T20 ABS Replacement Blade vs Generic Wood Replacement Blade

Sherwood T20 ABS Replacement Blade vs Bauer Street Hockey ABS Blade

Sherwood T20 ABS Replacement Blade — frequently asked questions

What surfaces is the Sherwood T20 ABS Blade designed for?

This blade is engineered for asphalt and concrete surfaces. It resists cracking and moisture absorption on hard outdoor courts. Wood blades typically split or splinter on these surfaces within a few sessions. The ABS core handles the abrasion and impact loads common in Indian outdoor play.

What flex should I use with this blade by body weight?

For outdoor two-piece sticks, match shaft flex to roughly half your body weight in pounds. A player weighing 70 kg (154 lbs) suits an 85 flex shaft. A player at 60 kg (132 lbs) suits a 75 flex. Younger or lighter players under 50 kg (110 lbs) should select a 55 to 65 flex shaft. The T20 blade itself is flex-neutral and works with any of these ranges.

Is this blade compatible with my existing shaft?

The T20 ABS Blade uses a standard 3.81 cm tapered two-piece connection. Most recreational and club shafts sold in India use this taper. Confirm your shaft specification before ordering. Pro-stock or custom tapers may not seat correctly.

How long does an ABS blade last on outdoor surfaces?

Blade lifespan depends on surface texture and session frequency. On smooth concrete, expect 30 to 50 hours of play before visible edge wear. On rough asphalt, inspect the blade face every 10 to 15 hours. The T20's fibreglass reinforcement extends life versus plain ABS blades.

Can I use this blade for ice hockey?

No. The T20 ABS Blade is calibrated for hard outdoor surfaces. It lacks the edge geometry and hollow required for ice play. Using it on ice will damage the blade and deliver poor performance. For ice, use a dedicated ice hockey replacement blade.

Does the blade come pre-taped?

The T20 ABS Blade ships without tape. Apply cloth stick tape starting at the heel. On outdoor surfaces, tape wears faster than on ice. Many outdoor players tape only the heel-to-mid section and replace tape every two to three sessions to maintain grip and ball control.

How do I install a two-piece replacement blade?

Insert the tapered hosel into your shaft opening. Align the blade face angle to your preferred lie. Apply light pressure and rotate slightly until seated. Some players use a small amount of blade adhesive for a permanent bond. No tools are required for a friction-fit installation.

Is this blade suitable for India's summer heat?

Yes. The ABS polymer matrix is formulated to resist thermal softening up to 45 °C ambient temperature. Outdoor courts in India regularly reach 40 °C to 44 °C in summer. Standard plastic blades can warp at these temperatures. The T20 maintains its geometry through India's hottest outdoor conditions.