Fischer RC One IS3 Composite ABS Hockey Stick

About the Fischer RC One IS3 Composite ABS Hockey Stick

The Fischer RC One IS3 Composite ABS Hockey Stick is engineered for players who demand measurable power transfer without sacrificing durability. Its fused two-piece construction bonds unidirectional carbon fiber with a fiberglass layer, producing a shaft stiffness profile optimized for mid-kick release at 525 g total weight. The hybrid ABS blade core resists deformation across indoor sport-court surfaces and cold-climate ice rinks, including facilities like the ice rinks in India. A tacky grip finish maintains hand contact through aggressive wrist shots and backhand passes without additional tape wrap. The RC One IS3 is purpose-built for club-level and performance-league players competing in Indian roller hockey circuits and international inline formats. R&D and quality validation are conducted at T3 Sports' Bengaluru facility, ensuring each stick meets dimensional and load-bearing tolerances before dispatch. Flex ratings are consistent shaft-to-shaft within ±2% variance.

Overview

Mid-Kick Power Architecture

The fused two-piece UD carbon and fiberglass shaft positions the flex point at the mid-zone, maximizing energy return during wrist shots and snap releases on both sport-court and rink surfaces.

• Unidirectional carbon fiber orientation for axial load efficiency
• Fiberglass layer adds torsional resistance without mass penalty
• Mid-kick profile suited to quick-release shooting styles
• Consistent flex across shaft length within ±2% tolerance

Hybrid ABS Blade Durability

The hybrid ABS blade core maintains structural integrity across repeated puck or ball impacts, performing reliably in India's indoor roller hockey environments and temperature-controlled rinks.

• ABS core resists deformation under high-impact contact
• Compatible with inline pucks and standard hockey balls
• Tacky shaft grip reduces slippage in warm indoor conditions
• Validated for performance play at facilities including Bengaluru indoor rinks

Fischer RC One IS3 Composite ABS Hockey Stick specifications

Key features

• Fused Two-Piece Shaft — UD carbon and fiberglass are bonded under controlled pressure, eliminating joint flex loss found in mechanically assembled two-piece sticks.
• Mid-Kick Flex Profile — Flex point engineered at the shaft mid-zone to optimize energy storage and release timing for wrist shots, snap shots, and off-the-pass releases.
• Hybrid ABS Blade Core — ABS composite blade core balances feel and durability, maintaining blade geometry across repeated ball and puck contacts on sport-court and ice surfaces.
• Tacky Grip Finish — Factory-applied tacky coating provides consistent hand adhesion in warm and humid indoor environments without requiring additional grip tape.
• Dimensional Consistency — Each stick is validated at T3 Sports' Bengaluru facility for shaft straightness, blade lie angle, and weight within defined production tolerances.
• Low-Mass High-Stiffness Ratio — At 525 g, the RC One IS3 achieves a stiffness-to-weight ratio suited to performance-level play without the fragility of ultra-light monocoque designs.
• Multi-Surface Compatibility — Blade and shaft construction tested for sport-court roller hockey, indoor turf, and cold-climate rink conditions including facilities operating in India.

Fischer RC One IS3 Composite ABS Hockey Stick size guide

Two things decide your stick: flex (how stiff it is) and length. Flex follows your body weight, length follows your height.

How to measure

1. Flex: choose roughly half your body weight in pounds (your weight in kg × 1.1). Lower flex is easier to bend and shoot with.
2. Length: stand in your shoes with the stick upright, blade toe on the floor. It should reach between your chin and nose.
3. Too long? It can be cut down at the top. Cutting a stick makes it a little stiffer (about 5 flex per 2 inches cut).

Stick flex & length chart

• Beginners and kids: choose a lower flex — it is easier to lift the puck.
• Hand (Left / Right): hold a broom like a stick. If your right hand is lower on the handle, you shoot Left; if your left hand is lower, you shoot Right.
• Not sure? Message us on WhatsApp (+91 91112 22274) with your measurements and we will confirm the right size before you order.

Flex and length from Bauer's stick size chart; Fischer uses the same flex scale.

How it compares

Fischer RC One IS3 Composite ABS Hockey Stick vs Entry-Level ABS Inline Sticks

Fischer RC One IS3 Composite ABS Hockey Stick vs Full-Carbon Composite Sticks (Performance Tier)

Fischer RC One IS3 Composite ABS Hockey Stick — frequently asked questions

Is the Fischer RC One IS3 suitable for inline roller hockey in India?

Yes. The hybrid ABS blade core and tacky grip finish are specifically suited to indoor sport-court surfaces common in Indian roller hockey clubs and leagues. The shaft construction also performs in cold-climate rinks such as those in Bengaluru.

What does mid-kick point mean for shooting performance?

A mid-kick profile positions the shaft's primary flex zone at the middle of the stick rather than near the blade or handle. This stores and releases energy efficiently during wrist shots and snap shots, making it well-suited to players who shoot in-stride or off quick passes.

How does the fused two-piece construction differ from a standard two-piece stick?

Mechanically assembled two-piece sticks join shaft and blade with an adhesive or friction fit, which can introduce micro-movement at the joint. The RC One IS3 uses a fused bond between UD carbon and fiberglass layers, eliminating that flex loss and producing a more consistent energy transfer.

Does the tacky grip finish replace grip tape?

The factory tacky coating is designed to function without additional tape wrap for most players. However, players with preference for thicker grip diameter or specific hand positioning can layer grip tape over the factory finish without adhesion issues.

What is the flex variance tolerance of the RC One IS3?

Shaft flex is maintained within ±2% across production units. This means players ordering multiple sticks of the same specification receive consistent shooting feel and power delivery across all units.

Can this stick be used on ice as well as inline surfaces?

The RC One IS3 is designed for both inline sport-court and cold-climate rink use. The blade core material and shaft construction tolerate the temperature and surface differences between indoor roller hockey environments and ice rinks.

Where is T3 Sports' quality validation conducted for this stick?

R&D and quality validation for T3 Sports products, including the Fischer RC One IS3, are conducted at the company's Bengaluru facility, where each stick is checked for shaft straightness, blade lie, and weight tolerances before dispatch.

What player level is the RC One IS3 designed for?

The RC One IS3 is engineered for club-level and performance-league players. Its composite construction and mid-kick architecture suit players who have moved beyond entry-level equipment and require consistent performance output in competitive match conditions.