CCM RBZ 150 Hockey Padded Shirt

About the CCM RBZ 150 Hockey Padded Shirt

The CCM RBZ 150 Hockey Padded Shirt (Model RPS150) is engineered for players who demand dependable protection without the bulk. At the heart of this shirt is CCM's proprietary U-Foam technology positioned on the sternum and spine — delivering the same impact-absorbing properties as traditional high-density foams at a fraction of the weight. Segmented, perforated foam panels line the biceps to provide targeted coverage while promoting continuous airflow, keeping you cooler during intense play. The compression base layer is constructed from a lightweight stretch mesh fabric that conforms to your body for a clean, second-skin fit underneath any protective shell. Whether you're blocking shots in the defensive zone or absorbing contact at centre ice, the RBZ 150 ensures your core and upper arms stay protected without restricting your stride or stickhandling. A performance-grade entry point built and distributed through T3 Sports India's Bengaluru facility.

Overview

U-Foam Sternum & Spine Protection

CCM's U-Foam technology is strategically placed on both the sternum and spine to guard the most vulnerable impact zones during play.

• Matches the impact absorption of high-density foam at a significantly reduced weight
• Exposed foam placement ensures direct-contact protection without additional padding layers
• Sternum guard shields against puck impacts and stick checks
• Spine panel protects against boarding and fall-impact forces

Segmented Perforated Bicep Foam

The bicep panels use segmented, perforated foam construction to deliver arm protection that flexes naturally and breathes freely.

• Perforations allow continuous airflow of approximately 30% more ventilation versus solid foam
• Segmented design follows the natural curve of the upper arm for unrestricted movement
• Targeted coverage on the bicep without adding bulk to the shoulder area
• Compatible with all standard shoulder pad styles

Compression Stretch Mesh Base

The full-body compression base is constructed from lightweight stretch mesh that hugs your torso for a stable, second-skin feel throughout all 60 minutes.

• 4-way stretch mesh adapts to every skating motion and body contour
• Compression fit reduces muscle fatigue during extended gameplay
• Moisture-wicking surface layer pulls sweat away from the skin
• Low-profile design layers cleanly under shoulder pads and jerseys

Lightweight Construction Philosophy

Every component of the RBZ 150 is chosen to minimise total garment weight without compromising on essential protective coverage.

• U-Foam weighs significantly less per cubic centimetre than traditional high-density foam
• Mesh base reduces total shirt weight compared to woven fabric alternatives
• Lightweight build suitable for youth, junior, and senior players who prioritise mobility
• Less total mass means less energy expenditure carrying protective gear across a full game

CCM RBZ 150 Hockey Padded Shirt specifications

Key features

• CCM U-Foam Technology — U-Foam is CCM's proprietary foam compound engineered to replicate the energy-dissipating properties of high-density foam at a drastically reduced mass per unit volume. On impact, U-Foam deforms to absorb kinetic energy and then rapidly returns to its original shape, maintaining consistent protection across repeated impacts throughout a game or practice session. Its exposed placement on the sternum and spine means impact force is absorbed at the outermost layer, preventing energy transfer to the player's chest and back.
• Segmented Perforated Bicep Foam — Unlike traditional solid foam bicep guards, the RBZ 150 uses a segmented and perforated foam panel design. Segmentation allows each individual foam block to flex independently, conforming to the arm's movement during skating, shooting, and puck-handling. Perforations create hundreds of micro-channels for airflow, allowing heat generated by the bicep muscles to escape rather than accumulate under the gear — a critical feature during high-intensity periods of play.
• Compression Stretch Mesh Shell — The base layer of the RBZ 150 is manufactured from a lightweight stretch mesh fabric engineered for compression performance. Compression garments have been shown in sports science research to support muscle stabilisation, reduce perceived exertion, and limit micro-vibration during explosive skating movements. The open-weave mesh structure also acts as a secondary ventilation system alongside the perforated bicep foam, maintaining a lower microclimate temperature against the skin.

CCM RBZ 150 Hockey Padded Shirt size guide

Shoulder pads are chosen by chest size first, then height. Measure your chest with a tailor's tape — it takes 30 seconds.

How to measure

1. Lift your arms slightly and wrap the tape around the fullest part of your chest, under the armpits.
2. Keep it snug but not tight, and note the number in centimetres.
3. Use chest first and height second. The pads should cover your collarbones and the cap should sit right on your shoulder.

Shoulder pad size chart

• Between sizes? Choose the smaller size if you play forward (more mobility), the larger if you play defence (more coverage).
• Not sure? Message us on WhatsApp (+91 91112 22274) with your measurements and we will confirm the right size before you order.

Based on CCM's upper-body size chart (approximate for padded shirts).

How it compares

CCM RBZ 150 Hockey Padded Shirt vs Generic Padded Hockey Shirts (Market Average)

CCM RBZ 150 Hockey Padded Shirt — frequently asked questions

What is U-Foam and how is it different from regular foam?

U-Foam is CCM's proprietary foam technology that replicates the impact-absorbing performance of high-density foam while weighing significantly less per cubic centimetre. Standard high-density foam is heavier and less flexible, whereas U-Foam maintains protective properties with greater weight efficiency, making it ideal for compression-fit garments like the RBZ 150.

Can I wear the CCM RBZ 150 Padded Shirt instead of separate shoulder pads?

No. The RBZ 150 is a padded under-shirt designed to provide supplementary protection to the sternum, spine, and biceps. It is intended to be worn under, and in conjunction with, standard hockey shoulder pads — not as a standalone replacement for full shoulder pad protection.

Is the RBZ 150 suitable for both ice hockey and inline hockey?

Yes. The compression fit and lightweight protective padding of the RBZ 150 make it appropriate for both ice hockey and inline/roller hockey. The stretch mesh base layer is breathable enough for the warmer environments typical of inline play, and the perforated bicep foam enhances airflow in non-ice settings.

How do I wash the CCM RBZ 150 Padded Shirt?

Machine wash cold on a gentle cycle using a mild detergent. Do not use bleach or fabric softeners, as these can degrade the stretch mesh fibres and compromise U-Foam density. Air dry flat or hang to dry — do not tumble dry or iron, as direct heat can alter the foam's structural properties.

Does this shirt have a compression fit for all sizes?

Yes. The RBZ 150 is designed exclusively in a compression fit across all sizes (S through XXL). The 4-way stretch mesh base accommodates a close-to-body fit at every size. Refer to the size guide and measure your chest circumference in centimetres to select the most accurate size.

Where is this product available in India?

The CCM RBZ 150 Hockey Padded Shirt is available through T3 Sports India, with operations based in Bengaluru. You can purchase online via the T3 Sports website or contact our Bengaluru team for availability and shipping details across India.

How do I get the price of this product?

Prices are shared on request — message us on WhatsApp (+91 91112 22274) for today’s price and stock, usually answered the same day.