CCM Next Hockey Shin Guards

About the CCM Next Hockey Shin Guards

The CCM Next Hockey Shin Guard (S23) is purpose-built for recreational players and developing skaters who demand genuine protection without sacrificing mobility. Constructed with molded plastic coverage from ankle to knee, the guard disperses impact energy generated by puck strikes, stick contact, and ice falls across a broad surface area rather than concentrating force on any single point. Both the shin cap and knee cap integrate ventilation ports that promote airflow, a meaningful advantage during high-humidity sessions at facilities such as the ASICS rink in Bengaluru where ambient temperatures regularly exceed 28°C outside the dasher boards. A wide calf strap anchored by an oversized hook-and-loop landing pad delivers a dialed-in, personalized fit across varied leg profiles. Internally, a sublimated PE foam liner conforms to leg contours for immediate out-of-the-box comfort. The liner is fully removable, reducing drying times between back-to-back training sessions and simplifying hygiene maintenance. At 481 g per pair in the 14-inch size, the Next Shin Guard occupies the lightweight end of the recreational protective spectrum, enabling full skating range of motion.

Overview

Full-Shell Protection

Molded plastic coverage from the top of the knee to the lower shin disperses energy from puck impacts, stick contact, and ice falls, reducing peak force transferred to the leg across all common recreational-level collision scenarios.

• Molded plastic shell spans knee cap to lower shin
• Energy dispersion reduces concentrated impact force
• Knee cap offers dedicated ventilation for airflow
• Anatomical shaping aligns with natural leg curvature
• Protective coverage suits recreational and beginner play levels

Dialed-In Fit

An oversized hook-and-loop calf strap system and removable PE foam liner work together to deliver immediate out-of-the-box comfort with a connected, locked-down feel suited to varied leg profiles and multiple sessions per week.

• Wide calf strap with large Velcro landing pad
• Removable liner reduces between-session drying time
• Sublimated PE foam liner washable for hygiene
• Low-profile design minimises bulk around the knee joint
• Fits securely over standard hockey socks and skate tongues

CCM Next Hockey Shin Guards specifications

Key features

• Molded Shell — A continuous molded plastic shell runs from the knee cap to the lower shin, providing a rigid outer layer that disperses puck and stick impact energy away from vulnerable bone and soft tissue.
• Ventilation Ports — Strategically placed ports in both the knee and shin caps allow warm air to escape during play, reducing heat build-up — a critical feature for indoor ice facilities operating in India's warm climate zones.
• Anatomical Fit — The guard's contoured geometry follows natural leg anatomy, eliminating the break-in period common to stiffer protective gear and allowing immediate on-ice comfort for new and returning recreational players.
• PE Foam Liner — A sublimated polyethylene foam liner cushions the inner surface of the shell, providing secondary impact absorption and a soft-touch feel directly against the leg during extended skating sessions.
• Removable Liner — The PE foam liner detaches fully from the shell, enabling players to machine-wash or hand-wash it independently and reduce drying times between back-to-back training days or tournament rounds.
• Calf Strap System — A wide calf strap with an oversized hook-and-loop landing pad secures the guard against the leg across a broad range of calf circumferences, preventing rotation and downward migration during dynamic skating movements.
• Low-Profile Design — Minimal bulk around the knee and calf preserves full range of motion for skating strides, tight turns, and forward crouching positions — essential for players prioritising mobility over maximum stiffness.

CCM Next Hockey Shin Guards size guide

Shin guard size (in inches) is about the same as the length from the middle of your knee to the top of your ankle. Height is a good quick check.

How to measure

1. Sit on a chair with your knee bent at a right angle.
2. Measure from the centre of your kneecap down to the top of your ankle (where the skate boot starts), in inches.
3. That number is roughly your shin guard size. The guard should cover your kneecap and reach the skate tongue.

Shin guard size chart

• Between two sizes? Pick the smaller one if you like a light, mobile fit; the bigger one if you want more coverage over the skate tongue.
• Wear the guard over (or under) the skate tongue the same way every time — it changes the size you need by about 1 inch.
• Not sure? Message us on WhatsApp (+91 91112 22274) with your measurements and we will confirm the right size before you order.

Based on CCM's NEXT shin guard size chart.

How it compares

CCM Next Hockey Shin Guards vs Bauer S23 Street / Entry Shin Guard

CCM Next Hockey Shin Guards — frequently asked questions

What certification do the CCM Next Shin Guards carry?

CCM Next Shin Guards meet Hockey Equipment Certification Council (HECC) standards for recreational shin protection. Players participating in organised Indian recreational leagues or open-ice sessions should verify that their specific league's equipment rules accept HECC-certified protective gear, as league standards can vary.

How is the mobility rating of the CCM Next Shin Guard characterised?

CCM categorises the Next Shin Guard under a maximum-mobility, minimal-weight fit profile. The low-profile shell and anatomical shaping minimise restriction around the knee joint, making the guard suitable for players who prioritise skating agility and full forward crouch depth over the higher stiffness associated with elite-level protective gear.

Can the CCM Next Shin Guard liner be machine washed?

Yes. The sublimated PE foam liner is fully removable and designed to be washed separately from the plastic shell. Hand washing in cool water with mild detergent is recommended to preserve foam density. The shell itself should be wiped down with a damp cloth and air-dried rather than submerged.

How do I select the correct shin guard size?

Measure from the centre of your kneecap to the top of your skate boot with the leg bent at approximately 30°. Match that measurement in centimetres to the size chart. If between sizes, select the larger size to ensure the knee cap is fully covered. Do not size by body weight alone, as leg-length proportions vary significantly between players.

Are CCM Next Shin Guards suitable for Indian recreational league play?

Yes. The guard's HECC-rated construction, lightweight 481 g profile, and ventilated knee and shin caps make it well-suited to recreational sessions at Indian indoor ice rinks, including facilities in Bengaluru. The removable liner also simplifies hygiene maintenance in multi-session weekly training schedules common in Indian development programmes.

How do CCM Next Shin Guards attach to the leg?

The guard uses a wide calf strap with an oversized hook-and-loop (Velcro) landing pad as its primary retention system. This configuration allows players to fine-tune tension across a broad range of calf sizes without tools, and the large pad surface maintains grip through full skating sessions without requiring mid-game readjustment.

What is the weight of the CCM Next Shin Guard?

The CCM Next Shin Guard weighs 481 g per pair at the 14-inch size. Smaller sizes will be proportionally lighter. This positions the Next within the lightweight tier of recreational shin protection, where reduced mass supports faster leg movement and lower fatigue during extended skating sessions.

Is the CCM Next Shin Guard appropriate for beginner hockey players?

The Next is designed specifically for beginner and recreational players. Its anatomical fit provides immediate out-of-the-box comfort requiring no break-in period, its full molded plastic shell delivers reliable protection against common beginner-level impacts, and its affordable positioning makes it a practical entry point for players equipping for the first time.