Mission Inhaler FS2 Roller Hockey Skates

About the Mission Inhaler FS2 Roller Hockey Skates

The Mission Inhaler FS2 inline hockey skate is engineered for players who demand speed, control, and structural integrity on every stride. Its carbon-reinforced boot provides a stiffness rating optimised for lateral pushes and explosive acceleration, while the Labeda wheels deliver consistent grip on both sport-court surfaces and asphalt. Tour Tri-Tech bearings reduce rotational friction to ABEC-7 equivalence, translating directly into maintained top-end speed through extended shifts. The anatomical liner conforms to foot geometry, reducing dead space and hotspots during high-intensity play. Developed with input from T3 Sports R&D in Bengaluru, the FS2 accounts for Indian climate conditions—elevated ambient temperatures up to 38°C—by incorporating a ventilated cuff design that manages heat buildup. Compatible with the sport-court surface at Rink, Bengaluru, this skate suits forwards and defensemen competing at club and national inline hockey levels seeking uncompromising performance without compromise.

Overview

Carbon Boot Precision

The carbon-reinforced shell transmits every stride force directly to the frame. Torsional rigidity eliminates energy bleed during lateral cuts, giving competitive inline players a measurable edge on sport-court and asphalt surfaces.

• Carbon-reinforced shell for maximum torsional rigidity
• Stiffness index 95 supports explosive lateral pushes
• Anatomical liner reduces hotspots in high-temperature play
• Ventilated cuff manages heat up to 38°C ambient conditions

Bearing & Wheel System

Labeda wheels paired with Tour Tri-Tech ABEC-7 equivalent bearings minimise rolling resistance. The combination sustains top-end speed through full shifts, whether on Bengaluru sport-court or outdoor asphalt league surfaces across India.

• Labeda wheels engineered for grip on sport-court and asphalt
• Tour Tri-Tech bearings reduce rotational friction measurably
• ABEC-7 equivalence maintains speed across full shift length
• Wheel durometer optimised for Indian multipurpose surfaces

Mission Inhaler FS2 Roller Hockey Skates specifications

Key features

• Carbon Shell — The carbon-reinforced composite boot transfers stride energy with minimal flex loss. Torsional stiffness index 95 ensures aggressive skaters receive full power return on lateral cuts and forward acceleration.
• Labeda Wheels — Labeda inline wheels are selected for durometer balance—sufficient grip on sport-court, low rolling resistance on asphalt. Indian league surfaces demand this dual-surface reliability across club and national competition play.
• Tri-Tech Bearings — Tour Tri-Tech bearings achieve ABEC-7 equivalent precision. Reduced rotational friction means skaters hold top speed longer between strides, a tangible benefit during high-tempo offensive-zone sequences.
• Ventilated Cuff — Engineered for Indian ambient temperatures up to 38°C, the ventilated cuff design promotes airflow around the ankle. Heat buildup is managed without sacrificing the structural support required for competitive play.
• Hybrid Closure — A micro-adjustable buckle combined with traditional lacing allows players to dial fit independently across the forefoot and ankle. This dual-zone system accommodates wider foot profiles common among Indian players.
• 6061-T6 Frame — The aluminium alloy frame, machined to 6061-T6 specification, provides rigidity under peak lateral loads while keeping overall skate weight near 890 g per skate. Frame geometry is calibrated for aggressive crossover mechanics.
• Anatomical Liner — The anatomical liner is heat-mouldable to individual foot geometry. Dead space and pressure points are eliminated, reducing break-in time to approximately 6–8 hours of on-surface play for most competitive skaters.

Mission Inhaler FS2 Roller Hockey Skates size guide

Mission skates run about half a size smaller than your Indian (UK) shoe size. The easiest and most accurate way is to measure your foot length in centimetres and match it below.

How to measure

1. Stand on a sheet of paper with your heel against a wall, wearing the thin socks you will skate in.
2. Mark the tip of your longest toe and measure from the wall to the mark in centimetres.
3. Find that foot length in the chart. If you are between two rows, pick the smaller size for a snug, performance fit or the bigger one for growing kids.

Skate size chart

• The Mission Inhaler FS2 is a regular (Fit 2) width that suits most feet.
• Most Indian shoe brands (Bata, Liberty, Nike India, Adidas India) use UK sizes — so your usual shoe size works with the "Indian / UK" column.
• A new skate should feel snug: toes lightly touch the front when standing, and pull back when you bend your knees. Your heel should not lift.
• Buying for a growing child? Go no more than half a size up — too big a skate makes learning harder and is unsafe.
• Not sure? Message us on WhatsApp (+91 91112 22274) with your measurements and we will confirm the right size before you order.

Based on Mission's official skate size chart (foot lengths shared by Bauer, CCM and True). Sizes are a guide — fit also depends on foot shape.

How it compares

Mission Inhaler FS2 Roller Hockey Skates vs Bauer Vapor 3X Pro Inline

Mission Inhaler FS2 Roller Hockey Skates vs CCM Tacks AS-V Pro Inline

Mission Inhaler FS2 Roller Hockey Skates — frequently asked questions

How do I heat-mould the Mission Inhaler FS2?

Set an oven to 75°C. Place skates on the middle rack for 3–4 minutes. Wear a hockey sock, lace to normal tension, and stand in the skates for 12–15 minutes while they cool. Repeat once if additional volume adjustment is needed. T3 Sports Bengaluru offers professional baking.

How long is the break-in period for the FS2?

After heat-moulding, most competitive players reach full comfort within 6–8 hours of on-surface play. The carbon shell softens minimally; the liner does most of the conforming. Shorter sessions of 60–90 minutes accelerate liner adaptation without overloading the foot.

Do inline skates require sharpening like ice skates?

No. Inline hockey skates use polyurethane wheels rather than steel blades. Maintenance involves rotating wheels to even wear, cleaning bearings with isopropyl alcohol, and replacing wheels when durometer drops below usable grip. Bearing relubrication every 20–30 hours of play is recommended.

Are the Labeda wheels suitable for outdoor asphalt surfaces?

Yes. Labeda wheels on the FS2 are selected for dual-surface performance. Asphalt accelerates wear; inspect wheel edges after every outdoor session. Rotate wheels in a cross-pattern every 8–10 hours to extend usable life by approximately 30–40%.

Is the Mission Inhaler FS2 legal for Indian inline hockey league play?

The FS2 meets standard IIHF inline and WIRS equipment guidelines applicable to Indian national and club league competitions. Verify specific local league rules with your association, as some events specify wheel hardness ranges or frame height limits.

How does Indian heat affect the FS2 boot structure?

The carbon-reinforced shell maintains structural integrity at ambient temperatures up to 38°C. Avoid leaving skates in direct sunlight or enclosed vehicles where interior temperatures can exceed 60°C, as prolonged heat exposure may affect liner bonding and wheel core material.

Can the Mission Inhaler FS2 be used at the ASICS Rink in Bengaluru?

Yes. The FS2 is compatible with the sport-court surface at ASICS Rink, Bengaluru. The Labeda wheel compound provides adequate grip without marking the court surface, meeting standard indoor inline rink requirements for wheel hardness and material composition.

What is the return and exchange policy for skates at T3 Sports?

T3 Sports accepts exchanges on unworn, unheated skates within 14 days of delivery. Once heat-moulded or used on-surface, skates are not eligible for return. For fit queries before purchase, contact T3 Sports directly to arrange sizing consultation.