Alkali Cele III Roller Hockey Skates

Available options

• Size: Adjustable, 5, 6, 7, 8, 9, 11

Ask us on WhatsApp which sizes are ready to ship.

About the Alkali Cele III Roller Hockey Skates

Engineered for recreational inline hockey players across India's growing roller hockey circuit, the Alkali Cele III (Model C3RS23) combines a 3D Injected Composite Weave boot with a heat-moldable fit system that adapts to high-volume foot profiles. The Hi-Lo Aluminum 6000 CNC chassis — secured with copper rivets — lowers the rear wheel profile to reduce fatigue and sharpen agility on the concrete and asphalt surfaces common to Indian rinks and outdoor courts. Alkali Loki 82A single-pour urethane wheels provide consistent grip at those hardness levels, with size-specific Hi-Lo configurations spanning 64 mm to 80 mm across skate sizes 1.0 to 13.0. AnaForm foam ankle padding and a reinforced one-piece felt tongue stabilise the ankle through repetitive lateral cuts. The injected composite outsole and high-strength plastic midsole keep the platform rigid without excessive weight — the size 9 unit checks in at 1,118 g. Designed and refined at T3 Sports' R&D facility in Bengaluru.

Overview

3D Injected Composite Weave Boot

The Cele III boot is built using 3D injection technology over a composite weave shell, striking a balance between structural rigidity and recreational comfort. Heat moldability ensures a personalised fit even for high-volume foot profiles common among Indian players.

• 3D injected construction for consistent shape retention
• Composite weave material reduces hotspots during long sessions
• Heat moldable for customised high-volume fit
• Reinforced one-piece felt tongue for uniform ankle pressure
• AnaForm foam ankle padding for lateral support
• High-strength plastic midsole + injected composite outsole

Alkali Hi-Lo Aluminum 6000 CNC Chassis

The Hi-Lo chassis design positions rear wheels lower than front wheels, improving forward lean and reducing ankle strain on extended skating sessions. CNC-machined from 6000-series aluminium and fastened with copper rivets, this chassis is calibrated for the concrete and asphalt surfaces dominant across Indian inline hockey courts.

• 6000-series CNC aluminium for strength-to-weight optimisation
• Hi-Lo geometry lowers centre of gravity for quicker edge transitions
• Copper rivets for long-term chassis-to-boot durability
• Alkali Loki 82A wheels suited to concrete and asphalt surfaces
• Size-scaled wheel configurations from 64 mm to 80 mm

Alkali Cele III Roller Hockey Skates specifications

Key features

• 3D Injected Composite Weave Construction — Injection moulding over a composite weave substrate delivers dimensional accuracy across the boot shell, improving durability and reducing material creep over a full season of recreational play.
• Heat Moldable Fit System — The boot can be oven-moulded to conform to high-volume foot shapes, eliminating pressure points that are especially common for players transitioning from ice hockey skates or new to the sport.
• AnaForm Foam Ankle Padding — AnaForm foam surrounds the ankle cavity, providing anatomical cushioning that absorbs impact from lateral cuts and reduces blister formation during break-in periods.
• Aluminum 6000 CNC Hi-Lo Chassis — CNC machining from 6000-series aluminium ensures chassis flatness within tight tolerances, while the Hi-Lo wheel height differential promotes a natural forward skating posture and reduces calf fatigue.
• Alkali Loki 82A Wheels — Single-pour 82A urethane construction provides uniform hardness throughout the wheel cross-section, ensuring consistent grip and predictable wear rates on concrete and asphalt rink surfaces.
• Size-Scaled Wheel Configuration — Wheel diameters scale with skate size — from (2) 64 mm + (2) 68 mm at sizes 1.0–2.0 up to (2) 76 mm + (2) 80 mm at sizes 8.0–12.0 — keeping stride geometry proportionally correct across the full size run.
• Copper Rivet Chassis Fasteners — Copper rivets resist corrosion from sweat and humid conditions — a practical advantage for players in India's high-humidity coastal and tropical cities — while maintaining chassis-to-outsole integrity over extended use.

Alkali Cele III Roller Hockey Skates size guide

Alkali skates run about half a size smaller than your Indian (UK) shoe size. The easiest and most accurate way is to measure your foot length in centimetres and match it below.

How to measure

1. Stand on a sheet of paper with your heel against a wall, wearing the thin socks you will skate in.
2. Mark the tip of your longest toe and measure from the wall to the mark in centimetres.
3. Find that foot length in the chart. If you are between two rows, pick the smaller size for a snug, performance fit or the bigger one for growing kids.

Skate size chart

• Wheel sizes change with skate size: 1–2 use 64/68 mm, 3–5 use 68/72 mm, 6–7 use 72/76 mm, 8+ use 76/80 mm wheels.
• Alkali skates have a medium (regular) width that suits most feet.
• Most Indian shoe brands (Bata, Liberty, Nike India, Adidas India) use UK sizes — so your usual shoe size works with the "Indian / UK" column.
• A new skate should feel snug: toes lightly touch the front when standing, and pull back when you bend your knees. Your heel should not lift.
• Buying for a growing child? Go no more than half a size up — too big a skate makes learning harder and is unsafe.
• Not sure? Message us on WhatsApp (+91 91112 22274) with your measurements and we will confirm the right size before you order.

Based on Alkali's official skate size chart (foot lengths shared by Bauer, CCM and True). Sizes are a guide — fit also depends on foot shape.

How it compares

Alkali Cele III Roller Hockey Skates vs Bauer Vapor X3 Roller Skate (Comparable Recreational Tier)

Alkali Cele III Roller Hockey Skates vs Mission Inhaler NLS:04 Roller Skate

Alkali Cele III Roller Hockey Skates — frequently asked questions

Are the Alkali Cele III skates suitable for indoor rink surfaces?

The Alkali Loki wheels included with the Cele III are rated at 82A hardness, optimised for concrete and asphalt outdoor surfaces. For smooth indoor sport-court tile — such as at some Indian inline facilities — a softer wheel in the 74A–78A range would provide better grip. The chassis accepts standard 608-bearing wheels, so swapping is straightforward.

How do I heat mould the Cele III boot?

Preheat a conventional oven to approximately 80°C–90°C. Place the skates (without wheels touching the oven rack directly) for 3–4 minutes until the boot shell becomes pliable. Lace them onto your feet immediately, stand in a natural hockey stance for 8–10 minutes until the boot cools, then remove. This process is repeatable if a refined fit is needed.

What is the weight of the Alkali Cele III in size 9?

The size 9 Alkali Cele III weighs 1,118 g, independently measured at IW Hockey with a ±5% variance. Weight scales with size and will be lower for smaller sizes.

What wheel sizes come with the Cele III for an adult size 9 or 10?

Sizes 8.0 through 12.0 — which cover most adult players — ship with (2) 76 mm front wheels and (2) 80 mm rear wheels in the Hi-Lo configuration. This setup balances top-end stride speed with manageable acceleration for recreational play.

Is the Alkali Cele III available in wide widths?

The Cele III is currently offered in Regular width only. However, the heat-moldable boot construction accommodates moderately high-volume and wider foot shapes when properly heat formed. Players with significantly wide feet should consult T3 Sports' fit team before placing a bulk B2B order.

Which leagues or formats in India are the Cele III skates suited for?

The Cele III targets recreational and entry-level competitive players participating in club practices, school programmes, and community leagues on concrete or asphalt surfaces — the most common formats across Indian cities. They are not designed for high-performance senior league competition where a stiffer, lighter boot is typically required.

What bearing standard do the Alkali Loki wheels use?

The Loki wheels use a 608 hub size, which is the universal inline hockey and fitness skate bearing standard. ABEC-rated 608 bearings are widely available across Indian sporting goods suppliers, making maintenance and replacement straightforward.

Can the Cele III chassis be upgraded to a higher-performance frame?

The Alkali Hi-Lo Aluminum 6000 CNC chassis is mounted via the injected composite outsole. Chassis replacement is technically possible but depends on bolt-pattern compatibility with aftermarket frames. Contact T3 Sports' technical team in Bengaluru for confirmed compatible upgrades before purchasing frames separately.