CCM Next Ice Hockey Skates

About the CCM Next Ice Hockey Skates

The CCM NEXT Player Skates are purpose-built for players entering competitive ice hockey, combining a reinforced thermoplastic boot with a stainless-steel blade for reliable edge retention session after session. The boot's integrated ankle support system reduces lateral flex by a measurable margin without sacrificing forward stride efficiency, a critical balance for players still refining their technique. At approximately 900 g per skate (size 7), the NEXT sits in an accessible weight range that does not punish newer skaters during extended ice time. The stainless-steel blade arrives pre-sharpened to a 10 mm radius of hollow, suitable for the fresh-cut ice surfaces found at Indian rinks including Bengaluru's facility and the Ice Skating Rink in New Delhi. The boot accommodates a standard D width, and the quarter package responds well to a low-heat mold cycle for a customized fit without specialised equipment. Designed and quality-validated at T3 Sports' Bengaluru R&D centre, the CCM NEXT is the structured entry point into ice hockey for the Indian market.

Overview

Reinforced Boot Construction

The quarter package uses a reinforced thermoplastic shell that holds ankle alignment under lateral load, reducing the ankle roll risk common among developing skaters learning edge transitions on Indian rink ice.

• Thermoplastic quarter package resists lateral compression
• Integrated ankle collar supports developing stride mechanics
• Compatible with low-heat mold cycle at 60 °C
• Toe cap reinforcement protects against puck and stick impacts

Stainless-Steel Blade

Factory-fitted stainless-steel blades arrive pre-sharpened to a 10 mm radius of hollow, delivering predictable bite on the ice surfaces at Bengaluru's ASICS rink and other Indian facilities without requiring immediate resharpening.

• Stainless-steel construction resists corrosion in humid conditions
• 10 mm radius of hollow factory sharpening
• Replaceable blade holder system for long-term cost efficiency
• Consistent edge retention across multiple skating sessions

CCM Next Ice Hockey Skates specifications

Key features

• Reinforced Quarter — The thermoplastic quarter package delivers structural rigidity around the ankle, reducing lateral flex during crossovers and edge transitions — a key support feature for players in the early stages of building skating technique.
• Heat-Moldable Fit — A 60 °C low-heat mold cycle allows the boot liner and quarter to conform to individual foot geometry, reducing pressure points and improving proprioceptive feedback without requiring a professional baking oven.
• Stainless Blade — Corrosion-resistant stainless-steel blades are factory-sharpened to a 10 mm radius of hollow, suited to the ice temperatures maintained at Indian rinks and resilient against the humidity common in tropical skating facilities.
• Replaceable Holder — The blade and holder assembly is designed for replacement, extending the usable life of the boot and providing a cost-efficient upgrade path as player skill level advances — an important consideration for B2B fleet procurement.
• Anatomic Tongue — The padded tongue distributes lace pressure evenly across the instep, reducing the discomfort that commonly causes newer players to skate with loose lacing, which undermines ankle support and edge control.
• Ventilated Liner — The moisture-wicking interior liner manages perspiration during sessions in India's enclosed rink environments, where ambient temperatures outside the ice surface can reach 30 °C or above, accelerating foot moisture build-up.
• D-Width Standard — Standard D width accommodates the median Indian male foot profile and aligns with CCM's global sizing standards, simplifying bulk ordering and size-run planning for rink operators and hockey academies across India.

CCM Next Ice Hockey Skates size guide

CCM skates run about half a size smaller than your Indian (UK) shoe size. The easiest and most accurate way is to measure your foot length in centimetres and match it below.

How to measure

1. Stand on a sheet of paper with your heel against a wall, wearing the thin socks you will skate in.
2. Mark the tip of your longest toe and measure from the wall to the mark in centimetres.
3. Find that foot length in the chart. If you are between two rows, pick the smaller size for a snug, performance fit or the bigger one for growing kids.

Skate size chart

• Youth sizes (for feet under 21 cm) are also made — ask us on WhatsApp.
• Width: CCM makes Tapered (narrow), Regular and Wide fits. Most Indian feet suit Regular or Wide.
• Most Indian shoe brands (Bata, Liberty, Nike India, Adidas India) use UK sizes — so your usual shoe size works with the "Indian / UK" column.
• A new skate should feel snug: toes lightly touch the front when standing, and pull back when you bend your knees. Your heel should not lift.
• Buying for a growing child? Go no more than half a size up — too big a skate makes learning harder and is unsafe.
• Not sure? Message us on WhatsApp (+91 91112 22274) with your measurements and we will confirm the right size before you order.

Based on CCM's official skate size chart (foot lengths shared by Bauer, CCM and True). Sizes are a guide — fit also depends on foot shape.

How it compares

CCM Next Ice Hockey Skates vs Bauer NS Skate

CCM Next Ice Hockey Skates vs CCM Jetspeed FT665

CCM Next Ice Hockey Skates — frequently asked questions

What skate size should I order if I wear a size 9 shoe?

CCM skates run approximately 1.5 sizes smaller than street shoes. A size 9 shoe (foot length approximately 270–279 mm) corresponds to a CCM Senior size 7. Always measure foot length in mm for the most accurate fit, and use the heat-mold process at 60 °C to fine-tune volume.

How do I heat-mold the CCM NEXT skates at home?

Preheat a standard oven to 60 °C. Place the unlaced skates on the centre rack for 4–5 minutes. Remove, lace them onto your feet while sitting, and hold the position for 8–10 minutes while the boot cools. This process customises the quarter and liner to your foot geometry without voiding fit integrity.

How long does the break-in period take for the CCM NEXT?

The NEXT's entry-level stiffness index of approximately 30 means most players experience a functional break-in within 3–5 ice sessions. The heat-mold process significantly reduces initial discomfort. Players training at Indian rinks with 45–60 minute session windows typically achieve full comfort by the second week.

How often should the blades be sharpened?

For recreational and developing players skating 2–3 sessions per week, blade sharpening every 8–10 hours of ice time is a standard guideline. The factory 10 mm radius of hollow is a neutral starting point. Rink operators at facilities like the ASICS rink in Bengaluru can advise on local ice hardness and optimal hollow depth.

Are the blades on the CCM NEXT replaceable?

Yes. The blade holder assembly on the CCM NEXT is designed for replacement, allowing a worn or damaged blade to be swapped without retiring the entire boot. This makes the NEXT a cost-efficient choice for rink operators managing bulk skate fleets across Indian hockey academies.

Are these skates suitable for India's ice rink conditions?

The stainless-steel blade resists corrosion from the humidity levels present in enclosed Indian rinks, where ambient external temperatures can reach 30 °C. The ventilated liner manages moisture build-up. The NEXT is validated for use at Indian facilities including the ASICS rink in Bengaluru and the New Delhi Ice Skating Rink.

Do the CCM NEXT skates meet any safety certifications?

The CCM NEXT is manufactured to CCM's internal quality standards and is suitable for recreational and developmental ice hockey. For competitive play under Hockey India or international IIHF-affiliated events, confirm with the event organiser whether additional equipment certifications are required for your age and division.

What width options are available for the CCM NEXT?

The CCM NEXT is available in standard D width, which accommodates the median foot profile. Players with notably wide feet (EE or wider) may find the heat-mold process at 60 °C provides sufficient volume adjustment for a comfortable fit without requiring a width upgrade.