Bauer Street 82A Roller Hockey Wheels (4-Pack)

About the Bauer Street 82A Roller Hockey Wheels (4-Pack)

The Bauer Street 82A Roller Hockey Wheels are purpose-built for hard outdoor surfaces. Each 4-pack is formulated at an 82A durometer — firm enough to resist wear on rough asphalt, yet grippy enough to hold clean edges through sharp cuts. Available in Senior sizes 80MM and 76MM, Junior sizes 76MM, 72MM, and 68MM, and Youth sizes 68MM and 59MM. The urethane compound is optimised for concrete and asphalt courts common across Indian outdoor rinks and multi-sport complexes. Consistent diameter tolerance across all four wheels ensures balanced roll and predictable acceleration. Whether you are a forward demanding explosive push-off or a defenceman requiring stable lateral movement, the Street 82A delivers. Replace all four wheels simultaneously to maintain symmetrical wear patterns and extend overall skate frame life.

Overview

Outdoor Surface Dominance

The 82A urethane formula grips asphalt and concrete without rapid breakdown. Hard courts demand a firmer compound. These wheels are rated precisely for that workload.

• 82A durometer optimised for rough outdoor surfaces
• Resists flat-spotting on abrasive concrete
• Consistent edge hold through lateral cuts

Multi-Size Coverage

From Youth to Senior, every size bracket is covered. Choose the correct diameter for your frame. Balanced sizing ensures proper stride mechanics and frame alignment.

• Senior: 80MM and 76MM options
• Junior: 76MM, 72MM, and 68MM options
• Youth: 68MM and 59MM options

Bauer Street 82A Roller Hockey Wheels (4-Pack) specifications

Key features

• 82A Urethane Compound — The 82A rating strikes the right balance. It is firm enough to survive rough asphalt. It remains grippy enough for aggressive edge work and explosive stride mechanics.
• Precision Diameter Tolerance — All four wheels share identical diameter within tight tolerances. Consistent sizing eliminates wobble. Balanced roll translates directly into smoother acceleration and predictable glide.
• Flat-Spot Resistance — Outdoor hockey demands hard braking and rapid direction changes. The compound resists flat-spotting under repeated stop-and-go stress common on Indian outdoor court surfaces.
• Lateral Stability — Edge hold during crossovers and defensive pivots requires a grippy outer contact patch. The Street 82A profile maintains lateral stability without sacrificing straight-line roll speed.
• Frame-Safe Hardness — Overly soft wheels flex against wheel bores and stress frames. The 82A rating keeps deformation minimal. Frames last longer when wheel hardness is correctly matched to the surface.
• Full-Set Replacement Design — Four wheels ship together. Replace all positions at once. Uniform wear across the skate frame eliminates the performance degradation caused by mixing old and new wheels.

Bauer Street 82A Roller Hockey Wheels (4-Pack) size guide

Roller hockey wheels are chosen by diameter (in mm) and hardness (the "A" number). The easiest way: check the numbers printed on your current wheels and buy the same.

How to measure

1. Look at the side of your current wheels — you will see a size like 76mm or 80mm and a hardness like 74A or 82A.
2. Order the same diameter. Most hockey frames use two sizes (Hi-Lo): smaller wheels at the front, bigger at the back.
3. Choose hardness by surface (see below).

Typical wheel sizes by skate size

• Hardness: a lower number (74A–76A) is softer and grips better indoors on smooth floors. A higher number (82A+) is harder and lasts longer outdoors on rough concrete.
• A full set for one pair of 4-wheel skates is 8 wheels.
• Never fit a wheel bigger than your frame allows — it will rub.
• Not sure? Message us on WhatsApp (+91 91112 22274) with your measurements and we will confirm the right size before you order.

Typical Hi-Lo setups from Alkali and Bauer frames. Your frame may differ — check your current wheels.

How it compares

Bauer Street 82A Roller Hockey Wheels (4-Pack) vs Generic 82A Outdoor Wheels

Bauer Street 82A Roller Hockey Wheels (4-Pack) — frequently asked questions

What surfaces are the Street 82A wheels designed for?

These wheels are built for asphalt and concrete. The 82A durometer is firm. It resists rapid wear on abrasive outdoor surfaces. Softer wheels degrade quickly on rough courts.

Can I use these wheels on smooth indoor sport tiles?

They will function on indoor tiles. However, 82A is a harder compound. Softer wheels in the 72A–76A range grip smooth tiles better. Reserve the Street 82A for outdoor court sessions.

How do I choose the correct wheel diameter?

Check your skate frame's original wheel specification. Senior frames typically accept 76MM or 80MM. Junior frames use 68MM to 76MM. Youth frames run 59MM or 68MM. Match the original spec precisely.

Should I replace all four wheels at the same time?

Yes. Replacing all four wheels together maintains consistent roll balance. Mixed wear levels create uneven load distribution across the frame. This accelerates bearing wear and reduces stride efficiency.

Do bearings come included with this 4-pack?

Bearings are not included. The Street 82A 4-pack ships as wheels only. Your existing bearings can be pressed into the new wheels. Inspect bearings for wear before reinstalling.

Are these wheels suitable for Indian outdoor hockey courts?

Yes. Most Indian outdoor roller hockey surfaces are rough concrete or asphalt. The 82A compound is matched to exactly these conditions. Performance holds up against the abrasive surfaces common across Indian cities.